The alarm system has two programming menus: User, and Technician; each menu is accessed
using its Master code. In addition, a Central Monitoring Station (CMS) menu can be accessed
using a separate CMS Lock code:
• Master User code: allows accessing all the user menus.
• Master Technician code: allows accessing all the technician menus, except locked CMS menu.
• CMS Lock code: an optional code for preventing access to the CMS settings by using the
Master technician code. This code only allows the technician/CMS to set and access the
CMS’ communication definitions, including the account ID and the paths.
2.1.1 Code setting guidelines
Note the following when setting codes in the FORCE security system:
• All codes are made of four to six digits, except the
Quick Arm
(two digits)
• A code cannot start with the
Quick Arm
’s two digits or the four digits of any code.
• A code cannot be viewed, nor retrieved.
2.1.2 Activation codes
Eight codes to be used for activating devices (via relay outputs) by the system users - whether
it is an electric gate or a floodlight, users can turn them on and off using these codes.
Triggering the outputs is done using the
Activation Codes 1-8
programmed output types (see
Appendix C, on page 35).
Activation codes are subject to keypad and user partitioning.
2.2 Changing the default Master and Technician codes
To enter the menus for the first time, the default codes must be changed. Follow the next steps
to change the codes.
1. Connect the alarm system to power and wait for the main screen to be displayed.
2. Press 5555; the codes’ menu is displayed.
3. Press - the curser moves to the right of the
Master Code
.
4. Enter a new 4-6 digit code. Write down the code and advice
the system owner to keep it in a safe place.
5. Press to save the code.
6. Press the down arrow to the
Tech. Code
and press .
7. Enter a new 4-6 digit technician code.
8. Press to save the code.
9. Press to exit.
2.3 The technician menu
The
Technician
menu has two sub-menus:
System Configuration
and
Tests & Diagnostics
.
To Next Page
Loading...
Need help?
General
