Pioneer CDJ-850 User Manual

16
DRB1526-A
En
16
Connections
Be sure to turn off the power and unplug the power cord from the power outlet whenever making or changing connections.
Refer to the operating instructions for the component to be connected.
Connect the power cord after all the connections between devices have been completed.
Be sure to use the included power cord.
Basic style
When connected to a Pioneer DJ mixer using the control cord (included), operations such as starting playback on this unit can be controlled
using the DJ mixer’s fader (page 24).
The fader start function can only be used when connected to a Pioneer DJ mixer.
R
L
AUDIO OUTCONTROLUSB
DJ player DJ mixer
Rear panel
Control cordControl cord
Power cord
To an AC outlet
Audio cableAudio cable
L
R
Using the relay play function
Relay playback on two DJ players is possible when the [CONTROL] terminals on this unit and the other Pioneer DJ player are interconnected
using a control cord (page 24).
R
L
AUDIO OUTCONTROLUSB
DJ mixer
Rear panel
DJ player
L
R
Control cord
To an AC outlet
Audio cableAudio cable
Power cord
Using DJ software
When connected to a computer by USB cable, the DJ software can be operated with this units (page 24).
The sound of music files playing on the computer can be output from this unit (page 11).
R
L
AUDIO OUTCONTROLUSB
DJ mixer
Rear panel
DJ player
USB CableUSB Cable
Other
brands of
DJ software
Computer
L
R
To an AC outlet
Audio cableAudio cable
Power cord

Pioneer CDJ-850 Specifications

General

USB direct playback	Yes
Product color	Silver
Type	-
Nominal speeds	- RPM
Signal-to-Noise Ratio (SNR)	115 dB
Line outputs (RCA)	1
AC input voltage	220-240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	21 W

Weight and Dimensions

Depth	364.4 mm
Width	305 mm
Height	105 mm
Weight	3310 g