Pioneer GM-A5602 User Manual

Specifications
GM-A5602
Power source ............................. 14.4 V DC (10.8 V to 15.1 V
allowable)
Grounding system ................... Negative type
Current consumption ............ 36 A (at continuous power,
4 W)
Average current drawn ......... 9.5 A (4 W for two channels)
15.5 A (4 W for one channel)
Fuse ................................................ 30 A × 2
Dimensions (W × H × D) ... 348 mm × 60 mm ×
215 mm
(13-3/4 in. × 2-3/8 in. ×
8-1/2 in.)
Weight .......................................... 2.3 kg (5.1 lbs)
(Leads for wiring not in-
cluded)
Maximum power output ....... 300 W × 2 (4 W) / 450 W × 2
(2 W) / 900 W TOTAL
(BRIDGE)
Continuous power output ... 150 W × 2 (at 14.4 V, 4 W,
20 Hz to 20 kHz, ≦ 1.0 % THD
+N)
450 W × 1 (at 14.4 V, 4 W
BRIDGE 1 kHz, ≦ 1.0 % THD
+N)
225 W × 2 (at 14.4 V, 2 W,
1 kHz, ≦ 1.0 % THD+N)
Load impedance ...................... 4 W (2 W to 8 W allowable)
Frequency response ............... 10 Hz to 70 kHz (+0 dB,
–3 dB)
Signal-to-noise ratio ............... 96 dB (IHF-A network)
Distortion ..................................... 0.05 % (10 W, 1 kHz)
Low pass filter:
Cut off frequency ........... 40 Hz to 500 Hz
Cut off slope ..................... –12 dB/oct
Bass boost:
Frequency .......................... 50 Hz
Level ..................................... 0 dB/6 dB/12 dB
Gain control:
RCA ......................................
0.3 V to 6.5 V
Speaker ..............................
3.0 V to 26 V
Maximum input level / impedance:
RCA ...................................... 6.5 V / 22 kW
Speaker .............................. 26V/16kW
CEA2006 Specifications
Power output ............................. 150 W RMS × 2 Channels
(at 14.4 V, 4 W and ≦ 1%
THD+N)
S/N ratio ....................................... 75 dBA (reference: 1 W into
4 W)
GM-A3602
Power source ............................. 14.4 V DC (10.8 V to 15.1 V
allowable)
Grounding system ................... Negative type
Current consumption ............ 14.5 A (at continuous power,
4 W)
Average current drawn ......... 4A(4W for two channels)
6.5 A (4 W for one channel)
Fuse ................................................ 25 A × 1
Dimensions (W × H × D) ... 238 mm × 60 mm ×
180 mm
(9-3/8 in. × 2-3/8 in. ×
7-1/8 in.)
Weight .......................................... 1.4 kg (3.1 lbs)
(Leads for wiring not in-
cluded)
Maximum power output ....... 120 W × 2 (4 W)/200W×2
(2 W) / 400 W TOTAL
(BRIDGE)
Continuous power output ... 60 W × 2 (at 14.4 V, 4 W,
20 Hz to 20 kHz, ≦ 1.0 % THD
+N)
180 W × 1 (at 14.4 V, 4 W
BRIDGE 1 kHz, ≦ 1.0 % THD
+N)
90 W × 2 (at 14.4 V, 2 W,
1 kHz, ≦ 1.0 % THD+N)
Load impedance ...................... 4 W (2 W to 8 W allowable)
Frequency response ............... 10 Hz to 70 Hz (+0 dB,
–3 dB)
Signal-to-noise ratio ............... 95 dB (IHF-A network)
Distortion ..................................... 0.05 % (10 W, 1 kHz)
Low pass filter:
Cut off frequency ........... 80 Hz
Cut off slope ..................... –12 dB/oct
Gain control:
RCA ...................................... 0.3 V to 6.5 V
Speaker .............................. 3.0 V to 26 V
Maximum input level / impedance:
RCA
......................................
6.5 V / 22 kW
Speaker .............................. 26V/16kW
En
13
English
Appendix
Additional information

Pioneer GM-A5602 Specifications

General

Current	36 A
Bass boost	0 - 12 dB
Signal-to-Noise Ratio (SNR)	96 dB
Number of amplifier channels	2 channels
RMS power output per channel (2 Ohm)	450 W
RMS power output per channel (4 Ohm)	300 W
Maximum power output per channel (4 Ohm)	600 W
Product color	Black, Red

Weight and Dimensions

Depth	215 mm
Width	348 mm
Height	60 mm
Weight	2300 g