88
MAINTENANCE
Transmission (Main Gearcase)
Always check and change the fluid at the intervals outlined in the Peri-
odic Maintenance Chart beginning on page 77. Refer to the Gearcase
Specifications Chart on page 92 for recommended lubricants, capacities
and torque specifications.
Fluid Check
The fill plug is located on the rear of the gearcase. Maintain the fluid
level at the bottom of the fill plug hole.
1. Position the vehicle on a level surface.
2. Remove the fill plug.
3. Check the fluid level.
4. Add the recommended fluid to the bottom of the fill plug hole. Do
not overfill.
5. Reinstall the fill plug. Torque to specification.
Fill Plug
To Next Page
Loading...
Need help?
General
