89
MAINTENANCE
Transmission (Main Gearcase)
Fluid Change
The drain plug is located on the bot-
tom of the gearcase. Access the
drain plug through the drain hole in
the skid plate.
1. Remove the fill plug.
2. Place a drain pan under the
drain plug.
3. Remove the drain plug. Allow
the fluid to drain completely.
4. Clean the drain plug.
5. Reinstall the drain plug with a
new o-ring. Torque to specifica-
tion.
6. Add the recommended fluid to
the bottom of the fill plug hole.
Do not overfill.
7. Reinstall the fill plug. Torque to
specification.
8. Check for leaks. Discard used
fluid properly.
To Next Page
Loading...
Need help?
General
