107
MAINTENANCE
Brakes
Brake Inspection
1. Check the brake system for
fluid leaks.
2. Check the brake pedal for
excessive travel or a spongy
feel.
3. Check the friction pads for
wear, damage and looseness.
4. Check brake discs for signs
of cracks, excessive
corrosion, warping or other
damage. Clean any grease
using an approved brake
cleaner or alcohol.
WARNING! Do not apply WD-40 or any petroleum product to brake discs.
These types of products are flammable and may also reduce the friction
between the brake pad and caliper.
5. Inspect the brake disc spline and pad wear surface for excessive
wear. Change pads when worn to .03” (0.762 mm).
.03” (0.762 mm)
To Next Page
Loading...
Need help?
General
