11
Freeze damage is not covered under warranty.
When storing the hose, do not coil it. Disconnect
the hose sections, drain them and lay them
straight in an area out of direct sunlight.
G. Accessories
1. UniCover (Part #5820)
The UniCover fits over most raised anti-vortex
main drain covers to create a surface for pool
cleaners to travel over with ease.
2. Ladder Guard Kit (Part #G-21)
The ladder guard kit will help prevent the
Polaris from getting stuck around pool ladders
or handrails.
3. WaterStars (Part #7-400-00) and
WaterStars WF (Part #11-100-00)
These fountains transform your pool into a lovely
showcase for special events. Choose between
the WaterStars fountain, which floats anywhere
you place it in the pool, and the WaterStars WF
fountain which mounts at the pool return line.
4. SpaWand (Part #5-100-00)
This simple, effective hand-cleaning device
allows you to rapidly clean your spa or pool steps
without hoses or hookups. It’s also great for fish
ponds and other small bodies of water.
5. LCS (Leaf Canister and Skimmer)
(Part #5810)
The Polaris LCS increases the skimming
efficiency by traveling on the surface gathering
debris. It also captures the debris collected by
the 140 to virtually eliminate the need to clean
the pump basket.
6. Revolve-it (Part #5800)
With its unique turning action, the Revolve-it
extends the life of the 140 hose and prevents
permanent coils from forming.
7. Ground Clearance Kit (Part #5-3500)
The Polaris 340 Ground Clearance Kit increases
clearance for your cleaner to easily accommo-
date irregular surfaces or sharp convexes on
pool bottoms. Allows easy installation within min-
utes using minimal tools.
To Next Page
Loading...
Need help?
General
