English
5
If your pool has two or three return lines, use the
Eyeball Fitting Connection Kit (part #9-100-8001).
This kit provides a Universal Wall Fitting (UWF
®
)
and pressure relief valve to be installed into the 2nd
return line. Also included is an eyeball regulator,
which will replace the existing eyeball if a 3rd return
line is present.
Use the UWF Eyeball Fitting Kit (part #6-511-
00) to restore proper water circulation when the
cleaner is removed from the pool.
If the pool does not have a dedicated return line, the Polaris 360 cleaner connects to most common
return lines using special adapter kits available for purchase at a participating Polaris dealer.
For pools with plastic-pipe return lines (without pipe threads) that are cut off flush with the pool wall:
1" Stub Pipe Connection Kit
(part #9-100-8002)
1" Return Line
1" Expansion
Connector
If pipe is 1″ in
diameter, use 1″ Stub
Pipe Connection Kit
(part #9-100-8002)
1-1/2" Stub Pipe Connection Kit
(part #9-100-8003)
1-1/2"
Expansion
Connector
1-1/2" Return Line
If pipe is 1-1/2″ in
diameter, use 1-1/2″
Stub Pipe Connection
Kit (part #9-100-8003)
look like this?
Connector
Retainer
Ring
Wall Fitting
Adapter
Eyeball Adapter Connection Kit
(part #9-100-8005)
For directional eyeball
fittings that do not
have a 1-1/2” threaded
socket, request the
Eyeball Adapter
Connection Kit (part
#9-100-8005)
Pool/Spa Connections Requiring Special Fittings
If a spa is connected to the pool filtration equipment, obtain expansion regulators in addition to one of the
kits listed above. Contact your dealer or Customer Service to determine which parts may be necessary.
Installing Other Pool Connections
Eyeball
Regulator
Pressure
Relief Valve
Universal Wall Fitting
(UWF)
O-Ring
Eyeball Connector
Eyeball Regulator
Retainer Ring
If the UWF and Eyeball
Regulators still cannot be
installed on the pool, contact
your dealer or Customer Service
to determine which parts may be
necessary.
Multiple Return Lines?
Polaris
®
Cleaner Removed from Pool?