79
MAINTENANCE AND LUBRICATION
Filter Systems (2X4, 4X4)
Breather Filter an d Hoses
1. Lift the cargo box and locate the
air box.
2. Follow t he right-hand breather
line (1) out the side of the air
box and locate the filter (2).
3. Remove and inspect the filter
for debris. Blow gently through
the filter in the direction of the
arrow to check for clogging.
Replace as needed.
4. Check hoses for cracks,
deterioration, abrasion, or leaks.
Replace as needed.
5. Reinstall the filter with the
arrow pointing toward the
engine and secure the clamps.
CAUTION
Operation of the vehicle without a breather filter can cause engine
damage. Always reinstall the breather filter after removing it for
service.
Fuel Filter
Your Polaris vehicle is equipped with an in-line fuel filter. Have your
dealer replace it after every 100 hours of operation. Do not attempt to
clean the fuel filter.
1
2
To Next Page
Need help?
General
