43
THE PERFECT FIT
Rear Suspension Adjustments
Torsion Spring Preload
To adjust rear torsion spring preload, rotate the three-position cam using
the engine spark plug tool. Different rate torsion springs are available if
a firmer ride is desired. Contact your dealer for more information.
The following information is provided only as a guideline to be used for
initial suspension set-up. Your set-up may vary based on your desired
riding style.
Soft (long end of cam to front)
Medium (short end of cam up)
Firm (long end of cam up)
Limiter Strap Position
The following information is pro-
vided only as a guideline to be used
for initial suspension set-up. Your
set-up may vary based on your
desired riding style.
High: Limiter strap in high position
increases ski pressure
Low: Limiter strap in low position
decreases ski pressure
To Next Page
Loading...
Need help?
General
