39
FEATURES
Instrument Cluster
Rider Information Center
Odometer/Engine Hour Display Area
This area displays the odometer, Trip A meter, Trip B meter and engine
hours meter.
The odometer displays the total distance traveled by the vehicle since
manufacture. Each trip meter records the distance traveled by the vehi-
cle on a trip if the meter is reset before each trip. The engine hour meter
displays the total hours the engine has been in operation since manufac-
ture.
To change the display, press and release the SELECT button or the SET
switch until the desired item is displayed.
To reset a trip meter, press and hold the SELECT button or the SET
switch until the meter resets to zero.
Playback Function
The playback function allows the rider to record and play back engine
speed, vehicle speed and throttle position sensor information for up to
three minutes.
1. To begin recording, simultaneously press and hold the MODE and
SELECT buttons on the instrument cluster for three seconds. The
playback indicator will flash while the instrument cluster is record-
ing.
2. To play back the recorded data, stop the vehicle and wait for engine
speed to drop below clutch engagement.
3. Simultaneously press and release the MODE and SELECT buttons
on the instrument cluster.
4. Applying the throttle will clear the display and return the instrument
cluster to normal operation.
To Next Page
Loading...
Need help?
General
