EasyManuals Logo
Home>Polaris>Offroad Vehicle>600 RMK 2013

Polaris 600 RMK 2013 User Manual

Polaris 600 RMK 2013
137 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #68 background imageLoading...
Page #68 background image
64
OPERATION
Break-In Period
Engine Break-In
Always follow these recommended break-in procedures for new or
rebuilt engines. The first tank of fuel is considered the break-in period
for the engine.
Premix the first tank of fuel and fill the oil reservoir as outlined below.
Oil added to the fuel and oil injection systems will provide the necessary
engine lubrication.
See page 116 for the part numbers of POLARIS products.
Never mix brands of oil. Serious chemical reactions can cause injection
system blockage, resulting in serious engine damage. Oils may also be
incompatible and the result could be sludge formation, filter blockage,
and reduced cold weather flow rates. All POLARIS oils are compatible
with each other.
Initial Fuel Premix
Always premix fuel in 5-gallon (19-liter) increments in a separate fuel
container. Never add oil directly to the fuel tank.
Oil Recommendations
First Tank of Fuel: POLARIS VES Gold Plus 2-Cycle Oil
After Break-in: POLARIS VES Gold Plus 2-Cycle Oil
Fuel VES Gold Plus Oil Ratio
Each 5 gal. (19 l) 16 oz. (473 ml) 40:1

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaris 600 RMK 2013 and is the answer not in the manual?

Polaris 600 RMK 2013 Specifications

General IconGeneral
BrandPolaris
Model600 RMK 2013
CategoryOffroad Vehicle
LanguageEnglish

Related product manuals