START THE ENGINE AND CHECK
Before starting the engine, always refer to all safety warnings pertaining to
snowmobile operation. Never engage the starter when the engine is running.
Never start the engine without checking all vehicle components to be sure of
proper operation. See page 109.
ENGINE STOP SWITCH
Check the auxiliary shut-off switch for proper operation. Push the switch down to
stop the engine. Pull it up to allow restarting.
IGNITION SWITCH
Make sure the engine stops when the ignition switch is turned to OFF.
TETHER SWITCH
Remove the tether from the switch to ensure the engine stops immediately.
LIGHTING
Check the headlight (high and low beam), taillight, and brake light. Replace
burned out lamps before operating.
OPERATING AREA
Before driving away, check your surroundings. Be aware of obstacles and make
sure bystanders are a safe distance from the snowmobile.
113
PRE-RIDE INSPECTIONS
To Next Page
Loading...
Need help?
General
