RIDE COMMAND DISPLAY
OVERVIEW
Welcome to Polaris Ride Command. This intuitive software includes a variety of
interactive features and access to your snowmobile’s custom information.
For a safe and enjoyable riding experience with your new display, be sure to
read your vehicle’s owner’s manual and this user’s guide. Should you need
additional assistance with display operation or software updates, please see
your Polaris dealer or visit ridecommand.polaris.com.
For the latest Ride Command information, including software, maps, and trails
updates, please visit ridecommand.polaris.com.
WARNING
Do not enter information while operating your vehicle. Failure to pay attention
to the operation of your vehicle could result in loss of control, injury, or death.
You assume all risks associated with using this device. Read your user’s guide
thoroughly and always drive with the latest maps and road data from
ridecommand.polaris.com.
BEFORE YOU DRIVE
Before driving with your new display, please complete the following:
• Read this manual in its entirety.
• Familiarize yourself with the features and operations of the display while the
vehicle is stationary.
• Download the Polaris Ride Command application from your phone’s app store
and create your personalized account.
• Check your display to ensure you have the appropriate maps and roads
visible for your area. For instructions on updating the maps on your display,
see page 88.
• When updating software, be sure you are using a compatible USB flash drive.
See page 90 for more information.
• Check https://www.polaris.com/en-us/owners-manuals for the latest updates
to the owner’s manual.
NOTICE
Using the display for an extended period of time while the vehicle’s engine is
off can drain the battery.
65
RIDE COMMAND DISPLAY
To Next Page
Loading...
Need help?
General
