BATTERY REMOVAL (ELECTRIC START MODELS)
WARNING
Improperly connecting or disconnecting battery cables can result in an
explosion and cause serious injury or death. When removing the battery,
always disconnect the negative (black) cable first. When reinstalling the
battery, always connect the negative (black) cable last.
1. Remove the right side panel
to access the battery.
2. Remove the plastic rivet
securing the console panel to
the chassis.
3. Disconnect the black (negative) battery cable first.
4. Disconnect the red (positive) battery cable last.
5. Remove the battery hold-down strap.
6. Remove the battery shield
q
.
Non-Boost Models
Boost Models
7. Remove the battery from the battery bracket.
BATTERY INSTALLATION
When installing a new battery, make sure it's fully charged prior to its initial use.
Using a new battery that has not been fully charged can damage the battery and
result in a shorter life. It can also hinder vehicle performance. Follow the battery
charging instructions before installing the battery.
164
MAINTENANCE
To Next Page
Loading...
Need help?
General
