CLUTCH WARNING
WARNING
Belt Removal – All Units
1. For electric reverse models, engine must be stopped in forward to allow
clutch opening.
2. Install L-wrench from fender into the open threaded hole in the driven clutch.
3. Turn the L-wrench clockwise to open the sheaves and replace the belt.
Return the L-wrench to the fender.
See Owner’s Manual for sheave width adjustment procedure.
Recommended oil: VES Full Synthetic 2-Cycle Engine Oil or VES Extreme Full
Synthetic 2-Cycle Engine Oil.
Part Number: 7300329.
GENERAL WARNING
WARNING
This snowmobile is designed for one (1) operator and as many passengers as
there are seats with handgrips installed on the snowmobile.
• Read and understand all warnings and Owner’s Manual before operation.
• Never consume alcohol or drugs before or while operating this vehicle.
• Sharp turns could destabilize vehicle.
• Always wear DOT approved helmet and proper riding gear while operating
this vehicle.
• Set parking brake before removing key from ignition.
• Do not attempt adjustment with engine running.
Part Number: 7300286.
HOT SURFACE CAUTION
WARNING
Hot Surface. DO NOT touch. Burns may result.
Part Number: 7300117.
31
SAFETY
To Next Page
Loading...
Need help?
General
