Page 18
English
3. Thread each tab into the slot provided and gently feed it through until the
heel comes out at the other side of the slot (Figure 22).
4
Figure 22. Pull Tabs Through Each Slot
4. Use scissors to cut the tabs so they are no higher than the spikes
(Figure 23).
Figure 23. Cut Tabs
Replacing the Track
1. Stand the cleaner on its side (Figure 24).
Figure 24. Stand Cleaner on its Side
2. Starting at one of the wheels, pull on the inside of the track to separate
the tire lip from the wheel. Remove the track from the cleaner.
To Next Page
Loading...
Need help?
General
