51
FEATURES AND CONTROLS
Instrument Cluster
Rider Information Center
Diagnostic Mode
The diagnostic mode is for informational purposes only. Pl ease return
your ATV to your dealer for all major repairs.
As long as the gauge is in the diagnostic mode, the wrench icon will
remain lit.
To leave the diagnostic mode, either shift t he machine out of neutral or
turn the key switch off and on. NOTE: Any m ovement of the tires
will also take the machine out of the diagnostic mode.
To enter t he diagnostics mode:
1. Turn the key switch off and wait 10 seconds.
2. Set t he parking brake and shift the t ransmission into neutral.
3. Hold the mode/reverse override button and turn the key switch on.
4. Release the switch as soon as the display is activated.
The initial screen display refers to the software version installed in
your ATV. This information i s displayed briefly.
Use the mode/reverse override button t o toggle through the diagnostic
screens.
Screen 1: Battery voltage
Screen 2: Tachometer
Screen 3: AWD diagnostic
This gauge indicates whether or not current is flowing through the
AWD coil (only on models with switchable AWD).
Screen 4: Gear circuit diagnostic
This screen displays the resistance value (in ohms) being read at the
gear switch input of the gauge.
To Next Page
Loading...
Need help?
General
