155
MAINTENANCE
Headlight Lamp Replacement
Headlight L amp Replacement - Sc rambler
1. Remove wire harness connector from the back of headlight.
2. Grasp bulb housing, turn counterclockwise and remove bulb.
3. Install bulb into headlight housing and rotate clockwise firmly.
NOTE: Bulb is to be positioned so the harness installs into the
lamp at the bottom.
4. Reinstall connector.
Keep you headlights and taillights clean. Poor lighting while
riding can result in an accident causing severe injury or death.
Do not service while headlight is hot. Serious burns may
result.
Do not touch a halogen lamp with bare fingers. Oil from
your skin leaves a residue, causing a hot spot which will
shorten the life of the lamp.
To Next Page
Loading...
Need help?
General
