97
MAINTENANCE
Tools
4. Pull the container out of the compartment.
5. When reinstalling the drive belt into the container, fold the belt as
shown. Verify that the belt loop at the rear of the container is
positioned slightly higher than the front loop.
6. Slide the container into the
engine compartment at an
angle.
7. Position the container
bracket onto the bumper
tube and rotate it downward.
8. Reinstall the spark plug
wrench into the bracket and
through the hole in the
bumper tube.
9. Rotate the spark plug
wrench clockwise until it
locks into place.
Step 4
To Next Page
Loading...
Need help?
General
