39
FEATURES AND CONTROLS
Multifunction Light
The green LED light, located on the motor
controller will illuminate, flashing initially
then remain on while the key is turned to the
On position AND the Master On/Off switch,
located under the seat, is in the On position.
The multifunction light is also your source
for trouble-shooting information in the
event that any electrical issues arise with the
vehicle. In normal operation the LED will
remain steady green. If a problem is
detected the light will flash, in different
sequences to indicate the type of issue to
investigate. Please refer to the Multifunction
Light Trouble-shooting Guide on page 40.
To Next Page
Loading...
Need help?
General
