52
OPERATION
Battery Use
• New batteries should be given a full charge before use.
• New deep cycle batteries need to be cycled several times before
reaching full capacity (50-125 cycles, depending on type). Capacity
will be limited during this time. Always make sure that all electrical
accessories are grounded directly to the battery (-) post. Never use the
chassis or body as a ground connection.
• Always observe all battery safety warnings and safe handling proce-
dures.
• Always keep battery terminals and connections free of corrosion.
• Always maintain a full charge on the batteries. For best battery life,
batteries should not be discharged 80% of their rated capacity. Proper
battery sizing will help avoid excessive discharge.
• Batteries should be kept clean and free of dirt and corrosion at all
times.
• Vent caps should be correctly installed and tight during vehicle opera-
tion and battery charging.
To Next Page
Loading...
Need help?
General
