9925252 6
DAILY INSPECTION
• Check seat belts and replace if damaged.
• Check OPS structure and fasteners.
• Check Safety Labels (Decals). Replace if damaged.
• Check frame fasteners - Inspect and insure tightness.
• Clean engine of flammable material.
• Clean pedals and operator’s area.
• Check engine oil level, fuel level, hydraulic fluid level, brake fluid level, engine
coolant level and engine air filter and pre-filter.
• Check tire condition and tire pressure. Check wheel fasteners for proper
torque.
• Check the travel control system, brake system, engine speed control system
and pedal travel.
• Check the front suspension, rear suspension and steering.
• Check the headlights, taillights, indicator lights and switches.
• Check PTO shaft splines, guards and shields. Replace if damaged or missing.
See Owner’s Manual for complete daily check list and maintenance procedures.
WARNING
Use the Occupant Protective Structure (OPS), which was designed for
the Utility Vehicle. Non-approved OPS structure modifications can cause
loss of operator protection and result in serious injury or death. Always
fasten seat belt when operating.
WARNING
Never use the machine in an atmosphere with explosive dust or gases or
where exhaust can contact flammable material. Explosion or fire can result.
AVOID INJURY OR DEATH
To Next Page
Loading...
Need help?
General
