104
MAINTENANCE AND LUBRICATION
Periodic Maintenance Schedule
DESCRIPTION Pre-
ride
Pre-
sea-
son
Mont
hly
or 25
Hrs
3
Mont
hs or
50
Hrs
6
Mont
hs or
100
Hrs
Tune
Up
Item
HULL / DECK / STEERING / CONTROLS
Steering support hub bush-
ings/fasteners/handgrips
I/L I/L •
Steering cable I/L/A I/L •
Steering Nozzle Bushings I R
Reverse cable inspection, lu-
brication
I I/L/A I/L/A
Handlebar / st eering operat ion
(t urns full y/freely/fast eners)
I I •
Hull, clean and inspect for
cracks, damage, or leaks
I C/I
Drain Plug Condition I I •
Bilge system inspection,
should not leak
I I I
Seat and compartment seals
(condition of seal)
I/A I/A •
Fire extinguisher I I •
Inspect and tighten all fas-
teners, including carburetor
mounts engine mounts, ex-
haust system, all hose
clamps; inspect muffler, bat-
tery, oil and fuel tank fasten-
ing devices, pump, steering
fasteners. Aggressive riding
requires more frequent ser-
vice.
I I •
I=Inspect, adjust, service, or replace if necessary
A=Adjust C=Clean R=Replace item
L=Lubricate with recommended lubricant
To Next Page
Loading...
Need help?
General
