47
CONTROLS AND FEATURES
Features
Engine Overheat
Some Polaris watercraft are equipped with a device which will limit
engine RPM if the engine overheats. This feature is designed t o help
prevent engine damage due to engine overheating.
If the high temperature indicator light or “hot” warning message
displays (and the engine RPM is limited) stop the engine immediately.
Clean the jet pump and impeller as outlined on page 90.
If the engine still overheat s after cleaning the jet pump and impeller,
take the watercraft to an authorized Polaris dealer for immediate
service.
When the cause of the of the overheat is identified and corrected,
normal operation can be resumed by releasing and reapplying the
throttle.
Accessories
Polaris has a wide range of watercraft accessories, from wetsuits and
life vests to accessory mirrors, touring and towing gear , and
performance parts. Contact your P olaris dealer for visit
www.polarisindustries.com or a full line of available products.
A clogged intake and/or impeller can cause overheating and/or
damage to jet pump and impeller parts.
CAUTION
To Next Page
Loading...
Need help?
General
