77
OPERATION
Reverse Operation
Some Polaris watercraft have reverse
capabilities. See page 10 to determine if
your watercraft has this feature.
Reverse Lever
1. To activate reverse, pull reverse
lever (A) all the way up. Lever will
remain in full up position.
2. Turn the handlebar and apply
throttle carefully as required to
maintain steering control of the
watercraft.
3. To return to forward, push reverse
lever to “forward” position.
Polaris Electric Reverse Control
(PERCt)
1. To activate reverse, depress the
reverse switch (B) (labeled RVS).
Varying degrees of reverse
engagement are possible,
depending on the duration the
reverse button is depressed.
2. Turn the handlebar and apply throttle carefully as required to
maintain steering control of the watercraft.
3. To return to forward, depress t he forward button (labeled F WD)
until the reverse gate is in the full up position.
NOTE: The reverse gate can be activated without the engine running
by depressing the bilge button and operating t he u/down button for
reverse actuation.
A
B
To Next Page
Loading...
Need help?
General
