91
OPERATION
n Throttle Lever
If the engine speed limits at 2400 RPM when the throttle lever is
released:
1. Turn the ignition switch to OFF.
2. Visually inspect the throttle cable and throttle body to determine
what caused the safety switch to activate.
3. Test the throttle lever by compressing and releasing it several times.
The lever and cable must return to the idle position quickly and
completely.
4. If the throttle lever operates properly, turn the ignition switch on and
go through normal starting procedures.
5. If the engine doesn't start, take the snowmobile to an authorized
Polaris dealer for service.
NOTE: Excessive freeplay in the throttle cable may cause the safety switch to
activate, preventing the engine from starting. If this occurs, return the
snowmobile to an authorized Polaris dealer for service.
Tu r b o N o i s e
Under some conditions, when the throttle lever is released the boost
pressure dump valve will release pressure, and you may hear the sound
of escaping air. This is a normal occurrence on turbo-charged models.
WARNING
An improperly functioning throttle lever may cause erratic machine behavior
and loss of control, which could result in serious injury or death. If the throttle
lever does not work properly, DO NOT start the engine.
To Next Page
Loading...
Need help?
General
