Polaris P94 User Manual

Page 7
English
Figure 9. Fully Assembled Transport Caddy
3.3 Connecting the Control Unit to the
Caddy
1. Align the bottom of the control unit with the
notch at bottom of the control unit hook on the
caddy (Figure 10).
Figure 10. Align Control Unit with Caddy Hook
2. Press control unit onto the caddy hook until it
snaps and locks into position (Figure 11).
8. Align cleaner hook pins with the top holes in
the handle tube and snap into place (Figure 7).
Figure 7. Snap Cleaner Hook into Place
9. (9500 Sport/P95) Locate pin on the remote
control holder and align it with the recepticle
on the handle of the caddy to attach the remote
control unit to caddy (Figure 8).
Figure 8. Snap Remote Control Holder into Place

Polaris P94 Specifications

General

Brand	Polaris
Model	P94
Category	Vacuum Cleaner
Language	English