Page 21
English
Section 8. Troubleshooting
8.1 Using the Information LED for Troubleshooting (9350 / P935 Cleaner)
The Information LED
on the control unit flashes in a specific sequence to indicate one of three possible
cleaner malfunctions.
Information LED Flashing Solution
interval.
If the problem is not resolved through troubleshooting, contact
Polaris Technical Support at (USA) 1-800-822-7933.
interval
Turn cleaner wheels to ensure they are not jammed.
Check brushes for debris.
Start a new cleaning cycle.
If the problem persists, contact Polaris Technical Support at (USA)
1-800-822-7933.
second interval
Check the pump axis for debris.
Check propellor for debris.
Start a new cleaning cycle.
If the problem persists, contact Polaris Technical Support at (USA)
1-800-822-7933.
8.2 Viewing Cleaner Status Information for Troubleshooting (9450 Sport/P945 and 9550
Sport/P955)
Information about your cleaner's current status and any relevent error condition is available through a
troubleshooting status screen. To view this information:
1. Remove cleaner from the pool and turn power off.
2. Press
and
The following cleaner operation messages are displayed consecutively for three (3) seconds:
Total hours cleaner has operated since new.
Last error code (if cleaner has had at least one error).
Time (in operating hours) the error occurred.
After cycling through each message, control unit returns to current day and time display.
To Next Page
Loading...
Need help?
General
