45
The device is not intended for industrial and commercial use, as well as for processing non-food products.
The manufacturer shall not be liable for damage resulting from improper use or use unintended in this Manual.
5. DESCRIPTION OF THE DEVICE
The PCM 1536E Adore Cappuccino coffee machine is designed for making coffee of the pre-ground coffee
beans by passing the heated drinking water under the pressure through a layer of ground coffee in the filter.
Fig. 1
1. Water tank cover
2. Removable water tank
3. Coffee machine body
4. Removable drip grid
5. Drip tray
6. ON/OFF button
7. Sealer and measuring spoon
8. Single-serve filter
9. Double-serve filter
10. Filter holder
11. Filter holder handle with clip
12. Steam/milk froth regulator
13. Milk froth dispensing tube nozzle
14. Lever of the milk froth delivery tube
15. Single-serve espresso indicator
16. Double-serve espresso indicator
17. Single-serve cappuccino indicator
18. Double-serve cappuccino indicator
19. Single-serve latte indicator
20. Double-serve latte indicator
21. OPTIONAL button (Espresso single-serve)
22. FROTH button (Cappuccino/milk froth single-serve)
23. CLEAN button (Latte single-serve/selection of the cleaning mode)
6. COMPONENT PARTS
1. Coffee machine assembly – 1 pc.
2. User Manual – 1 pc.
3. Warranty Certificate – 1 pc.
4. Packing (plastic bag + box) – 1 pc.
5. Measuring sealing spoon --1 pc.
7. STARTING PROCEDURE AND USE
Before the first use or if the coffee machine has not been used for some time it should be rinsed with clean warm
water as follows:
1. Remove the packaging material and advertising stickers from the coffee machine.
2. Wipe the device's case with a damp cloth.
3. Place the coffee machine on a flat surface.
4. Fill the tank with water (the water level must not exceed the "max" mark) and install it in the coffee
machine's body. Fill the milk tank with water and replace it.
5. Insert the power plug into the power outlet.
To Next Page
Loading...
Need help?
General