26
FEATURES AND CONTROLS
Seat Removal
Pull up on the front of the seat and slide it toward the front of the vehicle. Install the seat by
sliding the tabs into the rear of the seat base. Push down firmly on the front of the seat until
the pins are fully seated into the grommets.
Electronic Power Steering (EPS)
Electronic power steering (if equipped) engages when the ignition key is turned to the ON
position. EPS remains engaged whether the vehicle is moving or idle.
To conserve battery power, the EPS will shut down 5 minutes after the engine is stopped if
the key remains in the ON position. The EPS warning indicator will illuminate to indicate the
EPS has shut down. Turn the key off and on to reset the unit.
See page 30 for EPS warning indicator information.
To Next Page
Loading...
Need help?
General
