86
MAINTENANCE
Fuse Replacement
If the engine stops or will not
start, or if you experience other
electrical failures, a fuse may need
replacement. Locate and correct
any short circuits that may have
caused the blown fuse, then
replace the fuse. Spare fuses are
provided in a compartment on the
top of the access door.
1. Remove the front box/rack.
2. Remove the suspect fuse from
the fuse panel. If the fuse is
blown, install a new fuse with
the same amperage.
3. Reinstall the front box/rack.
Fuse Feature Supported
5A Speedometer
15A Electronic Fuel Injection
20A (Main Fuse) Ignition, Lighting
20A Accessories, 12V Power Receptacle
To Next Page
Loading...
Need help?
General
