EasyManuals Logo

Polaris Sportsman S User Manual

Polaris Sportsman S
139 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #114 background imageLoading...
Page #114 background image
112
MAINTENANCE AND LUBRICATIO N
Cleaning and Storage
Storage Tips
Fog the Engine
1. Remove the spark plug and add 2-3 tablespoons of Premium 4
Synthetic 0W40 engine oil. T o access the plug hole, use a section of
clear 1/4 hose and a small plastic squeeze bottle fille d with the
pre -me asure d amount of oil. NOTE: Do this ca re fully! If you miss
the plug hole, oil will drain from the spark plug cavity into the hole
at the front of the cylinder head, and appe ar to be an oil lea k.
2. Reinstall the spark plug. Torque to 18 ft. lbs. (24 Nm).
3. Apply diele ctric grea se to the inside of the spark plug cap and install
the cap onto the plug.
4. Turn the engine over seve ra l times. Oil will be forc ed in and around
the piston rings and ring lands, coa ting the cylinder with a protec tive
film of fre sh oil.
Alternative to Using Fogging Oil
If you choose not to use Polaris Fogging Oil, perform the following
procedure.
1. Treat the fuel system with Polaris Carbon Clean, following the
instructions on the can. Run the engine for several minutes so the
Carbon Clean reaches the carburetor. Turn the engine off.
2. Support the front end of the machine so the engine is level or tilted
slightly rearward.
3. Remove the spark plug. R otate the piston to BDC and pour
approximately two ounces of recommended oil into the cylinder.
4. Reinstall the spark plug and torque to 18 ft. lbs. (24 Nm).
5. Apply diele ctric grea se to the inside of the spark plug cap and install
the cap onto the plug.
6. Turn the engine over several times to ensure coverage of piston
rings, cylinder walls and crankshaft bearings.
7. If Polaris fuel system additive is not used, fuel tank, fuel lines, and
carburetor should be completely drained of gasoline. To eliminate
any fuel remaining in the carburetor, run the engine until it stops.
Inspect and Lubricate
Inspect all cables and lubricate. Follow lubrication guidelines in the
Maintenance Section of the service or owners manual to completely
grease and lubricate t he entire vehicle with Polaris Premium All
Season Grease.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaris Sportsman S and is the answer not in the manual?

Polaris Sportsman S Specifications

General IconGeneral
BrandPolaris
ModelSportsman S
CategoryOffroad Vehicle
LanguageEnglish

Related product manuals