Make sure the lithium battery has been fully charged before the first use.
Make sure an SD Memory card has been inserted into your camera.
SD Memory card Class 4 or higher and up to 32GB - Memory Card not included.
Please see Initial Camera Setup for more information.
Press the Power button to turn your camera ON.
After powering on, the camera emits a sound and the LED light turns on briefly.
The LCD screen turns on with your camera in Photo Capture mode to start.
While the camera is on, you can press the Power button again at any point to turn your
camera OFF.
Your digital camera has an Auto Power Off feature that automatically turns off your camera after a
specific period of time that your camera is left idle. The Auto Power Off settings can be set from
the ‘Auto Power Off’ settings menu. As per the selected setting, the camera first goes into ‘sleep
mode’ which turns the LCD screen black. Press the Shutter button to reactivate the camera. If the
camera is not reactivated after one minute, the camera then automatically powers off.
To Next Page
Loading...
Need help?
General
