• Setting Self-timer
Your camera is designed with a self-timer function, which allows you to
take pictures with a 10-second built-in timer.
1. Turn on the camera.
2. Set the camera to Still Image mode.
3. Press the Self-timer button to activate the self-timer function.
4. The icon
will appear on the LCD screen.
10-second Self-timer indicates a countdown of ten seconds.
NOTE:
Press the Self-timer button again to disable the self-timer function and the
“SELF TIMER OFF” indicator will be shown on the LCD screen for a while.
OK
M
W
T
Self-timer button
Self-timer On
5. Capture procedures are the same as for taking a picture in the
normal capture mode. Please see “Taking a Picture” on page 25.
6. Press the Shutter button to take a picture. The camera beeps (if the
beep sound is turned on) and the Self-timer LED blinks slowly for 6
seconds, then quickly for 4 seconds before the picture is taken.
NOTE:
Place the camera on a at surface or use a tripod when using the self-timer
function.
To Next Page
Loading...
Need help?
General
