VoiceStation 100 Installation Instructions and User’s Guide
2
1 Connect one end of the long console
cable to the bottom of the phone.
Installing VoiceStation 100
2 Insert the Power Supply plug into
a nearby electrical outlet.
3 Connect the other end of the long
console cable to bottom of the
Power Supply.
VoiceStation 100 will run a brief
self-test, and then sound a tone.
If you don't hear the tone, verify that
the outlet is working and the power is
switched on.
4 Connect the short telephone cable
to the Power Supply.
Note:Your telephone system
administrator or service technician
can help identify a standard analog
phone line. Standard analog phone
lines are used for fax machines,
answering machines, modems,
and many single-line telephones.
5 Connect the other end of the short
telephone cable to a jack wired for a
standard analog phone line.
To Next Page
Loading...
Need help?
General
