Generating Power to the World
Page 15 of 25
PTI-15/20-T4F Operators Manual
Modes, Starting and Stopping Methods
The following table describes the different operating modes of the controller:
When in the OFF mode, the engine cannot be remotely started.
When in the Auto mode, the engine waits to receive a start command.
When engine is Running, the controller monitors engine parameters
and waits to receive a stop command.
When a failure occurs, the controller shuts down the engine and
displays reason for failure. The unit must be reset using the front panel
OFF button with the exception of Modbus.
When in the menu you can change settings and view the events
history.
To Next Page
Loading...
Need help?
General
