9. When not using the machine for long periods of time, unplug the power cord from
the outlet.
10. The effective power must be in scope of 220V.
Quick Start Guide
1. Plug the power cable into the back of the unit and into the wall power outlet.
2. On the back of the machine, flip the power switch to power on.
3. The machine will go through an automatic self-diagnostics test to ensure accurate
bill counting. The counting wheels in the bill counter will spin several times to ensure
it is ready for use. When the machine has completed its test run and “0” displays
on the machine, it is now ready for counting.
3. Place your currency into the hopper to automatically begin counting.
▪ To avoid wrong detecting, please check and take out the banknotes before counting
which are as following:
1. Mended notes with paper 2. Washed notes 3. Very dirty notes 4. Broken
notes
Correct Feeding of Banknotes
Banknotes need to be put orderly and placed between the counting guides, please
refer to the following pictures:
Method One:
Method Two:
To Next Page
Loading...
Need help?
General
