PRODIM 2017 © Proliner Quick start guide - Training preparation Page 2
General
Condential
The information contained in this Proliner Quick start guide – Training prepa-
ration is intended solely for the use of your company. You are hereby notied
that any disclosure, copying, distribution or taking any action in reliance of the
contents of this Proliner Quick start guide – Training preparation is strictly pro-
hibited and may be unlawful.
Copyright
© All rights reserved. Apart from the legally laid down exceptions, no part of
this publication may be reproduced, stored in an automated databank, or made
public in any shape or form, be it electronically, mechanically, by photocopying,
lming, or in any other manner, without prior written permission from Prodim
International BV in Helmond (NL).
Disclaimer
The inuence of the operator on the measuring process is dominant, thus making
him fully responsible for accuracy and safety. While using the Proliner he must
ensure that:
No one is allowed near the cable or the control box while the pen is in use. A
broken cable or dropped pen can cause rapid and unpredictable retraction of
the cable which can severely injure anyone it might contact.
We advise to make control measurements once in a while to ensure accuracy.
The Proliner is a precision measuring machine. Let only trained personnel
work with the Proliner. Do not use the Proliner in areas where there is a lot of
construction work.
Subject to change
The contents of this manual may change without notice.
Proliner® is a registered brand name of Prodim International BV.
To Next Page
Loading...
Need help?
General