Chapter 4 Award BIOS Setup
Prox-1260 USER
′
S MANUAL
Page: 4-23
RESET CONFIGURATION DATA:
Normally, you leave this field Disabled. Select Enabled to reset Extended
System Configuration Data (ESCD) when you exit Setup if you have
installed a new add-on and the system configuration has caused such a
serious conflict that the operating system cannot boot.
RESOURCE CONTROLLED BY:
The Award Plug and Play Bios can automatically configure all of the booth
and Plug and Play-compatible devices. However, this capability means
absolutely nothing unless you are using a Plug and Play operating system
such as Windows 95. By choosing “manual”, you are allowed to
configure the IRQ Resources, DMA Resources and Memory Resources.
The choices are Auto (ESCD) and Manual.
IRQ RESOURCES:
You may assign each system interrupt a type, depending on the type of
device using the interrupt.
DMA RESOURCES:
When resources are controlled manually, assign each system DMA channel
a type, depending on the type of device using the DMA channel.
PCI/VGA PALETTE SNOOP:
Leave this field at disabled.
ASSIGN IRQ FOR USB:
Enable or Disable to assign IRQ for USB.
ASSIGN IRQ FOR VGA:
Enable or Disable to assign IRQ for VGA.
To Next Page
Loading...
Need help?
General
