12
GB
Rotary/chiseling hammer
CHP 26 PLUS – original instruction
Table of contents
1 Symbols ................................... 12
2 Tool Specifi cations ...................... 12
3 Operating Controls ..................... 12
4 Notes on Safety Prevention ......... 13
4.1 General Safety Instructions ......... 13
4.2 Work area ................................. 13
4.3 Electrical safety ......................... 13
4.4 Personal safety .......................... 13
4.5 Additional Safety Rules ............... 14
4.6 Machine-specifi c Safety Warnings .. 14
4.7 Noise / Vibration Information ........ 15
5 Application ................................ 15
6 Activation ................................. 15
6.1 Additional handle ....................... 16
6.2 Depth stop ................................ 16
6.3 Switching on/off ........................ 16
6.4 Speed control ............................ 16
6.5 Rotational direction switching ...... 16
6.6 Selecting the modes of operation ... 16
7 Inserting / Removing tools ........... 17
7.1 Inserting tools ........................... 17
7.2 Removing tools .......................... 17
8 Accessories ............................... 17
8.1 Screw adapter assembly
(accessory) ............................... 17
8.2 Thread chuck ............................ 17
9 Practical tips .............................. 17
10 Maintenance .............................. 18
11 Environmental Protection /
Disposal.................................... 18
12 Warranty .................................. 18
13 Declaration of Conformity ............ 19
1 Symbols
Double insulation
Warning of general danger
Risk of electric shock
Use protective goggles!
Wear ear protection!
Wear a dust mask!
Read the instructions
Not to be included in municipal refuse
Drilling / Stirring / Screwing
Impact drilling
Positioning the chisel
Chiselling
► Advice or tip
2 Tool Specifi cations
Voltage 220 – 230 V
Frequency 50 / 60 Hz
Input power 800 W
No-load speed 0 – 1000 min
–1
Impact rate, max. 4900 min
–1
Impact energy 2.8 J
Right / Left rotation •
Safety clutch •
Clamping collar dia. 43 mm
Tool holder SDS-Plus
Drill dia., max.
Steel 13 mm
Wood 40 mm
Hammer drilling in conctrete 26 mm
Weight 2.9 kg
Protection class II /
3 Operating Controls
[1-1] Tool holder
[1-2] Protective anti-dust cover
[1-3] Unlocking sleeve
[1-4] Operation mode switch
[1-5] Revolution regulation switch
[1-6] Locking button
[1-7] Rotation direction switch
[1-8] Additional handle
[1-9] Depth stop
[1-10] Handle – insulated grip
[2-1] Operation mode switch
[3-1] Unlocking sleeve
[3-2] Screw adapter
[3-3] Tool holder
[3-4] Chuck
Not all of the accessories illustrated or de-
scribed are included as standard delivery.
To Next Page
Loading...
Need help?
General
