10
PDC 18-4 Compact
GB
3 Machine features
The specified illustrations appear at the be-
ginning of the Operating Instructions.
4Intended use
Cordless impact drills are suitable for
– drilling in metal, wood, plastic and similar
materials,
– impact drilling into walls, concrete and
similar building materials,
– inserting and tightening screws
Charger BCL 3 is suitable for
– charging battery packs: Protool BP, Festool
BPS and BPC (NiMH, NiCd, li-ion are recog-
nised automatically.)
– internal use only.
The user is liable for improper or non-
intended use.
5 Safety instructions
5.1 General safety instructions
WARNING! Read all safety warn-
ings and all instructions.
Failure to
follow the warnings and instructions may re-
sult in electric shock, fire and/or serious in-
jury.
Save all warnings and instructions for
future reference.
The term "power tool" in the warnings refers
to your mains-operated (corded) power tool
or battery-operated (cordless) power tool.
5.2 Machine-related safety instruc-
tions
–
Hold power tool by insulated gripping
surfaces, when performing an opera-
tion where the cutting accessory may
contact hidden wiring or its own cord.
Cutting accessory contacting a "live" wire
may make exposed metal parts of the
power tool "live" and could give the opera-
tor an electric shock.
–
Wear suitable protection:
such as ear
protection, safety goggles, a dust mask for
work which generates dust, and protective
gloves when working with raw materials
and when changing tools.
– Do not lock the on/off switch permanently!
– Handicapped and impaired persons or chil-
dren are not permitted to use this machine
or only under supervision.
– Do not open the battery pack or the charg-
er!
– Prevent metal parts (e.g. metal chips) or
fluids from entering the charger!
– Do not use battery packs or chargers from
other manufacturers!
– Protect the battery pack from excessive
heat or constant heat sources such as sun-
light or naked flames!
– Never use water to extinguish burning li-
ion battery packs! Use sand or a fire blan-
ket.
Wear a dust mask.
Do not throw in the household waste.
[1-1]
Bit store
[1-2]
Capacity display
[1-3]
LED lamp
[1-4]
Drilling/impact drilling selector
switch
[1-5]
Gear switch
[1-6]
Torque thumbwheel
[1-7]
Right/left switch
[1-8]
On/Off switch
[1-9]
Belt clip
[1-10]
Battery pack
[1-11]
Button for releasing the battery
pack
[3-1]
Holder for battery pack
[3-2]
LED-Display
[3-3]
Cable holder
[4]
Wall mount
[5-1]
Clamping sleeve
CAUTION
Recoil
X
Rotation: switch off machine immediately!
To Next Page
Loading...
Need help?
General
