MAINTENANCE
ATTENTION: DISCONNECT FROM MAINS POWER SUPPLY BEFORE DOING ANY
MAINTENANCE WORK. IF PROPER CARE IS TAKEN TO MAINTAIN YOUR CLEANER,
MOTOR MAINTENANCE IS UNNECESSARY. HOWEVER WE RECOMMEND THAT
YOUR CLEANER IS SERVICED ONCE A YEAR.
1. Remove the mesh from around the HEPA Filter.
OPERATION
1. Ensure the HEPA Filter and mesh is always fitted before the cleaner is used.
2. This cleaner can be used with or without a dust bag.
3. If using a dust bag please ensure it is fitted properly before use.
4. Once the dust bag is full we recommend a new dust bag be fitted.
Dry Vacuum Cleaning
Wet Vacuum Cleaning
1. Ensure the HEPA Filter and dust bag is removed before the cleaner is used.
2. Clean the tank after each use. Avoid leaving dust or dirty water in the tank.
3. Wipe the machine inside and out from time to time, using only luke warm water. Before use always
examine the power cable for cuts and/or damage. Follow Maintenance Instructions.
4. Wet pick up accessories should be washed periodically.
13
To Next Page
Loading...
Need help?
General
