Pullman WD20LSSO User Manual

MAINTENANCE (CONTINUED)
2. Twist the locking knob with an anti-
clockwise force
to remove the filter.
3. Wash and clean the HEPA Filter and mesh
carefully using luke warm water.
4. Dry by airing.
40°C
max
24hr
5. Place the filter and mesh back into the
cleaner. Twist the locking knob clockwise
to lock into position.
Cleaning the Tank
1. Disconnect the latches on the side of the cleaner and remove the canister lid.
2. Remove dust bag. Replace with a new bag if needed.
3. Empty the tank and clean inside of it thoroughly. Use luke warm water only.
14

Pullman WD20LSSO Specifications

General

Brand	Pullman
Model	WD20LSSO
Category	Vacuum Cleaner
Language	English