10
Wet Vacuum Cleaning
1. Ensure the HEPA filter is fitted and the dust bag is
removed before the cleaner is used.
NOTE: DO NOT USE A DUST BAG FOR WET VACUUMING!
Blower Function
Cleaning hard to reach locations or, where vacuuming is not
possible, like leaves from a garden bed.
1. Connect the suction hose to the blower connection, this
will activate the blower function.
Power Outlet
240V power outlet allows you to attach a power tool and then
use the vacuum as an extractor while you work.
To use the power outlet, turn the switch of the vacuum
cleaner to the “II” position. The vacuum will power on after the
power tool is turned on.
Max output of the Power Outlet is 1000W.
2. After cleaning, unplug the cleaner from the mains power
supply, empty the tank by using the drain port.
Avoid leaving dust or dirty water in the tank.
3. Wipe the machine inside and out from time to time, using
only luke warm water. Before use always examine the
power cable for cuts and/or damage.
4. Wet pick up accessories should be washed periodically.
OPERATION
To Next Page
Loading...
Need help?
General
