13PULLMAN 30L WET & DRY VACUUM WD30BV1
TROUBLESHOOTING
TROUBLE POSSIBLE CAUSE REMEDY
Suction weakens or
cleaner runs hot
Clogged filter Brush dirt from filter. If condition continues,
change filter.
Air leak Check all fittings for tight fit (floor tool, hoses,
etc.). Check that tank cover is sealed properly.
Obstruction in hose
or floor tool
Check floor tool, hose, etc. for obstructions,
and remove if present.
Misting in the exhaust air Saturated filter Remove saturated filter and the
filter mesh.
To Next Page
Loading...
Need help?
General
