9
● When setting the flashing digits, they are advanced quickly by keeping button A
pressed, except the seconds and 12-/24-hour indication.
● Seconds digits setting:
The seconds are reset to “00” by pressing button A.
NOTES ON OPERATING THE WATCH
* When the seconds count any number from “30” to “59” and button A is pressed, one
minute is added and the seconds are reset to “00”.
● The changeover between 12- and 24-hour indications is made alternately with each
press of button A.
➾
➾
● When setting the hour in the 12-hour indication, check that AM/PM is properly set. Only
“P” (PM) is displayed. For the AM setting, there is no indication.
● When the time function is displayed in the 24-hour indication, the alarm function is also
displayed in the 24-hour indication.
● If the watch is left untouched in the TIME/CALENDAR SETTING display with the digits
flashing, it will automatically return to the CALENDAR display in 1 to 2 minutes.
● The calendar automatically adjusts for odd and even months except February of leap
years.
DIGITAL TIME/CALENDAR SETTING
To Next Page
Loading...
Need help?
General
