Pulsar w863 - Lap and Split Time Changeover; Memory Recall Mode; How to Delete Channel Data

16 17
English
English
ALARM TIME SETTING
E
s
Press to select the desired alarm channel (from AL-1 to AL-3).
A
s
Press for 2 seconds to show ALARM SETTING display.
s
Press to select the digits to be adjusted (hour/minute).
E
s
Set the ashing digits. (Increasing digits)
Set the ashing digits. (Decreasing digits)
C
B
or
s
A
Return to ALARM mode.
“ON” and the alarm marks appear and the alarm is automatically
engaged.
ALARM ENGAGEMENT/DISENGAGEMENT
l
The alarms can be engaged and disengaged independently of one
another.
Press to select the desired alarm channel (from AL-1 to AL-3).
E
s
With each pressing, the selected alarm is engaged and disengaged
alternately.
C
At the designated time, the alarm rings for 20 seconds. To stop it
manually, press any of the buttons.
E
C
Alarm mark
“ON” markSet alarm time
Alarm channel