7
LIGHTCAMERA USER GUIDE
FEATURES
ACTIVATE SIRENS
The LightCamera has a loud siren built in which can be triggered via the smart device application.
To activate the siren, tap the icon pictured on the left. When activated, the symbol will turn red.
To switch the siren o, press the red icon (pictured left) and the siren will silence. Once deactivated,
the icon will turn back white.
FLOOD LIGHT ACTIVATION
The two ood lights on the LightCamera have a maximum brightness level of 2500 lumens and can be manually
switched on if required.
Tap the light icon (pictured left) to switch on the two ood lights. The icon will turn red when the
lights are on.
To extinguish the lights, tap the red icon pictured left. The icon will go back white when the lights
have switched o.
IMAGE QUALITY
The quality of the live stream can be changed on the LightCamera. The options are Standard, HD and Ultra HD.
Please note: The higher the image quality, the more data it will use when live streaming and will take up
more space when saving recordings to the memory card (if inserted).
To change the image quality, click the icon pictured left and a drop down menu will appear.
Ultra HD
This option is a full high denition resolution of 1920 × 1080px and will use the most
data and bandwidth to stream and record.
HD
With a resolution of 1280 x 720px, this option uses less data and bandwidth than Ultra
HD (but more than standard) whilst maintaining a clear image.
Standard
This is lowest resolution option with a resolution of 720 × 480px, and therefore uses the
least data and bandwidth when live streaming.
To Next Page
Loading...
Need help?
General