Matrix 6/816 User Manual
Page 6 RINS545-7
2.2 Timers
Programmed Default
Entry Time 20 sec
Exit Time 20 sec
Final Exit Delay 7 sec
Bell Time 4 min
2.3 Arm Options
Programmed Default
Arm Option For Mode A Timed Exit
Arm Option For Mode B Timed Exit
Arm Option For Mode C Timed Exit
Arm Option For Mode D Timed Exit
2.4 Your Servicing Company Details
Company Name Contact Person Telephone
2.5 Fault tones
While system faults are being displayed the keypad sounder periodically emits a low tone. This is to alert you
to the fault. Once you are aware of the fault you can silence the low tones by pressing the ` key once while
the fault is being displayed. If the fault is not cleared for a period of time then the sounder will re-start.
In hidden display mode the fault sounder cannot be silenced.
2.6 Open zones
This is only applicable if the keypad is not in hidden display mode.
To view open zones at any point whilst in disarmed mode use the [ or ] keys.
If enabled by the engineer, all activated zones can also be viewed while the panel is armed and disarmed, if
the zone is currently open the number will flash on the Icon or LCD keypad.